An item cannot be selected in maintool mobile, the app rejects it or the quantity, or time recording with Work [Start] does not start because a unit of measure is missing. Usually information in the master data is missing, or the device has not yet synchronized the change. Find the symptom or the message in the tables and fix the cause.
Item missing or rejected
| Symptom or message | Cause | Solution |
| The item does not appear in any selection, for example in Item Information, or after entering or scanning the number the app reports The value "…" for the field "…" is invalid. | Use in Mobile is not enabled for the item, or the device has not synchronized since it was enabled. | Enable Use in Mobile on the item card (collana maintool FastTab) and synchronize. See Prepare master data for maintool mobile. |
| The item does not appear despite Use in Mobile. | The item has the Type Service. maintool only transfers items of the type Inventory and Non-Inventory to the app. | You cannot use items of the type Service in maintool mobile. Report them in Business Central. |
| You can only select items that are in stock in the system. | For the selected location and bin, the app shows no stock of the item. This applies, for example, to the item feedback, the feedback in the work order and lines of ad hoc work orders. In the item feedback, items of the type Non-Inventory are exempt. | Check location and bin. If the stock in Business Central is correct, recalculate the stock for the app (Recalculate Stock action) and synchronize. |
| The maximal quantity is …. | The quantity entered is greater than the stock that the app knows for the location, bin and, if applicable, serial or lot number. | Reduce the quantity. If the stock in the app is wrong, recalculate it and synchronize. |
| A location is missing from the selection. | maintool does not transfer in-transit locations to the app. | Select another location. |
Unit of measure of the resource missing
These messages appear with Work [Start] and Work [Stop] in the work order or when selecting a resource in the feedback.
| Message | Cause | Solution |
| The base unit "…" of the resource "…" is not stored a mobile unit for the determination of the time difference. | With Work [Start] or Work [Stop]: the base unit of measure of the user's resource has no Mobile Unit of Measure on the Units of Measure page. If the unit of measure code in the message is empty, the resource has no Base Unit of Measure. | If required, enter a Base Unit of Measure on the resource card. On the Units of Measure page, select a Mobile Unit of Measure (Day, Hour, Minute or Second) for this unit of measure and synchronize. |
| The "…" field of the Resource "…" is empty. Please contact your IT administration. | When selecting a resource in the feedback: the selected resource has no Base Unit of Measure. The app does not take it over. | Enter a Base Unit of Measure on the resource card and synchronize. |
The Mobile Setup Analyser also shows which resource units of measure have no mobile unit of measure, see Check the setup with the Mobile Setup Analyser.
Notes
- The user sees changes to items, units of measure and stock only after the next synchronization.
- If the user cannot open the tile itself, see Tile or function missing in maintool mobile.
Related articles
Related to