The Maintenance - Worker Role Center is intended for employees who carry out work orders. The tiles count work orders only: current, unfinished and future ones. In addition, there is a calendar for selecting the period of the tiles and the work order traffic light, which shows the share of completed orders. This article describes the setup, how the periods are calculated and what each tile counts.
Role Center setup
The setup applies per user. When a user opens the Role Center for the first time, maintool creates the user's setup with default values. You open the setup by searching for Worker Role Center Setups and selecting the user's line. The Maintenance Worker Role Center Setup Card page opens.
| FastTab | Field | Meaning | Default value |
| General | Res. Department No. | Filter on the responsible department of the work order. Blank means: no filter. | blank |
| General | Person in Charge No. | Filter on the person in charge of the work order. Blank means: no filter. | blank |
| Cues | Status Value Range | Work order status values for the tiles Tasks to be performed and Future Tasks. | 100..300 |
| Cues | Actual Period | Day, Week or Month: basis for the end of the current period. | Week |
| Cues | Current Period Additional Time | Extends the current period. Only positive date formulas are allowed, for example 3D. | 7D |
| Cues | Future Period | Length of the future period after the current period. Only positive date formulas are allowed. | 31D |
| Cues | Status Range Unfinished | Work order status values for the tiles Unfinished Work. | 200..269 |
| Order trafficlight | Threshold Green | From this percentage of completed orders, the traffic light is green. | 50 |
| Order trafficlight | Threshold Yellow | From this percentage, the traffic light is yellow; below it, red. | 30 |
| Order trafficlight | Status Value Range Traffic Light | Work order status values of the orders that the traffic light takes into account. | 200..400 |
| Order trafficlight | Threshold to Finish | Work order status value from which an order counts as completed for the traffic light. | 270 |
How the periods are calculated
The tiles filter on the Execution Date-Time of the work order. maintool calculates the periods when the Role Center opens, based on the work date.
- Current period: It has no start date, only an end date. This means that all older work orders are counted as well. The end date is the end of the current period (work date, Sunday of the current week or end of month), extended by the Current Period Additional Time, at 23:59 in each case.
- Future period: It starts on the day after the end of the current period at 00:00 and ends the Future Period after the end of the current period at 23:59.
Examples with the work date Tuesday, 01/21/2025:
| Actual Period | Current period without additional time | Current period with additional time 3D |
| Day | until 01/21/2025 23:59 | until 01/24/2025 23:59 |
| Week | until 01/26/2025 23:59 | until 01/29/2025 23:59 |
| Month | until 01/31/2025 23:59 | until 02/03/2025 23:59 |
Example for the future period: With Month, no additional time and a Future Period of 31D, the current period ends on 01/31/2025. The future period runs from 02/01/2025 00:00 to 03/03/2025 23:59 (01/31/2025 plus 31 days).
With the default values (Week, additional time 7D, Future Period 31D), the tiles for the current period count all work orders up to 02/02/2025, and the tiles for the future period count the work orders from 02/03 to 03/05/2025.
Tiles
All tiles take the Res. Department No. and Person in Charge No. filters from the setup into account. Whether a work order counts as planned or unplanned depends on the Planned field in the work order. maintool sets it for work orders created from a time schedule, an object monitoring line or a contract.
| Tile | Work order status value | Period | Further conditions |
| Tasks to be performed | |||
| Current, unplanned | Status Value Range | current | not planned, excluding standing orders |
| Current, planned | Status Value Range | current | planned, excluding standing orders |
| Current, all | Status Value Range | current | not blocked, excluding standing orders |
| Standing Work Orders | Status Value Range | none | standing orders only |
| Unfinished Work | |||
| Unfinished, unplanned | Status Range Unfinished | current | not planned, not blocked, excluding standing orders |
| Unfinished, planned | Status Range Unfinished | current | planned, not blocked, excluding standing orders |
| Unfinished, all | Status Range Unfinished | current | not blocked, excluding standing orders |
| Future Tasks | |||
| Future, unplanned | Status Value Range | future | not planned |
| Future, planned | Status Value Range | future | planned |
| Future, all | Status Value Range | future | not blocked |
A click on a tile opens the list of the counted work orders. With the actions New Work Order Request and New Work Order, you create a new record directly from the Role Center.
Select the period in the calendar
When the Role Center opens, the Calendar shows the calculated current period. If you select a different period in the calendar, maintool recalculates the tiles: the current period is then the selected period with start and end date, and the future period starts on the day after the selected period.
Example: If you select the days from 01/27/2025 to 01/31/2025, the filter is 01/27/2025 00:00 to 01/31/2025 23:59.
The selection applies only until the Role Center recalculates the tiles, for example when you open a tile and then return to the Role Center. The tiles then count with the period from the setup again, even if a period is still selected in the calendar. With the Reset action in the calendar, you restore the period from the setup yourself.
Work order traffic light
The Work Order Traffic Light shows which share of the work orders in the current period has been completed, for example 6 of 10 Orders completed (60 %). maintool calculates it as follows:
- It counts all work orders that are not blocked, lie in the current period and have a work order status value within the Status Value Range Traffic Light (default 200..400). The Res. Department No. and Person in Charge No. filters apply here as well. Standing orders are included.
- Of these work orders, all with a work order status value from Threshold to Finish up to the upper limit of the Status Value Range Traffic Light count as completed. With the default values, these are the values 270 (Reported finished in mobile) to 400 (Closed).
- The percentage is calculated from both numbers.
- If the percentage is at or above Threshold Green, the traffic light is green. If it is at or above Threshold Yellow, it is yellow, otherwise red.
If there is no matching work order in the period, the traffic light shows red and the text No Work Order available in the choosen selection.
Related articles
Related to