Correct a posted work order feedback

  • Updated

If you have posted too many hours, the wrong resource or the wrong item to a work order, you correct this with a reversing entry: you enter a line with a negative quantity and apply it to the original work order ledger entry. A posted work order feedback itself has no undo function.

If you have posted too little, no correction is needed. Simply post the missing quantity with another work order feedback.

Prerequisites

  • There is a work order ledger entry with the Entry Type Consumption for the incorrect posting.
  • The entry was created by a work order feedback, by Report as Planned, by the work order journal or by time recording. Entries from purchase documents or from the general ledger cannot be applied in this way.

Which method fits?

Situation Correction
Too much or wrong posting, work order not yet closed Reversing entry in a new work order feedback (see below)
Too much or wrong posting, work order in status Closed Reversing entry in the work order journal (see below)
Hours from time recording Undo in the posted time recording, see Record and post times
Posted correctly, but to the wrong work order or with wrong dimensions Reclassify, see Reclassify and readjust postings

Correct a posting in a work order feedback

  1. Open the work order and choose Create Work Order Feedback.
  2. If maintool has pre-filled lines from the work order, delete all lines on the Lines FastTab that you do not want to correct.
  3. Use personalization to show the Applies-to Entry No. column.
  4. Enter a line with the same Type and the same No. as the incorrect posting.
  5. In Quantity, enter the quantity to be corrected with a minus sign, for example -2 for two hours too many.
  6. In the Applies-to Entry No. field, select the original entry from the Work Order Ledger Entries list and confirm with OK.
    The list only shows consumption entries of this work order with the same type and the same no. whose Remaining Quantity is at least as large as the correction quantity.
  7. Post the work order feedback, see Create and post a work order feedback.

When applying, maintool takes the Unit Cost, Direct Unit Cost, Unit Price, Location Code, Bin Code, Variant Code and the dimensions from the original entry. The reversing entry therefore cancels the posting at exactly these values.

Correct a posting in the work order journal

In the work order journal, you correct in the same way: line with the same type and the same no., negative Quantity, then select Applies-to Entry No. (show the column via personalization). Unlike in the work order feedback, the Location Code, Bin Code and Variant Code of the line must already match the original entry. How to post in the journal is described in Post hours and material in the work order journal.

Closed work orders

You cannot create a work order feedback for a work order in status Closed. In this case, correct in the work order journal:

  • Enter the no. of the closed work order in Work Order No.. maintool then sets the Revision indicator in the line.
  • Or show the Revision column and activate it first. The selection in Work Order No. then only shows closed work orders.

The resulting entries also carry the Revision indicator. You can therefore recognize subsequent postings to closed work orders in the Work Order Ledger Entries by the Revision column.

Result

  • maintool posts a new work order ledger entry with a negative quantity. The Applies-to Entry column of the new entry shows the no. of the original entry.
  • The Remaining Quantity of the original entry is reduced by the corrected quantity. If it is 0, the entry is fully applied and no longer appears in the selection for further corrections.

You can view the entries, for example, in the work order journal via Work Order > Entries > Work Order Entries. Show the Applies-to Entry and Revision columns via personalization.

Error messages

Message Cause and solution
Quantity should be less than zero. You selected Applies-to Entry No. with a positive quantity. Enter the negative quantity first.
Remaining Quantity could not be smaller than Quantity. The correction quantity is larger than the Remaining Quantity of the entry, for example because it has already been partially corrected. Reduce the quantity or split the correction across several lines and entries.
If the item carries serial or lot numbers, then you must use the … field in the Item Tracking Lines window. The original entry has a serial or lot number. Leave Applies-to Entry No. empty and specify the application in the Item Tracking Lines of the line.
Message about the Applies-to Entry No. field when posting A line with a negative quantity has no application. Select the original entry.
The selection in Applies-to Entry No. does not open or is empty The quantity is not negative, or there is no matching entry: different type or no., remaining quantity too small, entry from a purchase document or (in the journal) different location, bin or variant.

Undo hours from time recording in the posted time recording and not via a work order feedback. Only then does maintool mark the lines of the posted time recording as undone.

Related articles

Related to

Was this article helpful?

0 out of 0 found this helpful

Have more questions? Submit a request