An instruction combines work steps, inspection points and questions in a fixed order. If you add tasks from the checklist task catalog and mark them as Mandatory, the instruction becomes a checklist: the work order can then only be finished once a result has been entered for each of these tasks.
Prerequisites
- The tasks you want to query exist in the checklist task catalog. See Create a checklist task in the catalog.
Create an instruction
- Open the Instructions list. You can find it via search under Instructions.
- Choose New.
The Instruction page opens. - On the General FastTab, enter a Code (maximum 10 characters).
- Enter a Description (maximum 80 characters) or turn on First Textline as Description (see below).
- If required, choose the skill needed to carry out the instruction in the Resource Skill Code field.
First Textline as Description
If this toggle is turned on, maintool uses the text of the first line as the Description and updates it when you change or delete the first line or insert a line before it. You then cannot edit the Description field on the card. The Instructions list shows the transferred description. If you turn the toggle off again, maintool clears the Description.
Add checklist tasks
On the Lines FastTab, enter the lines in the order in which they are to be worked through. For each checklist task:
- In the Instruction Type field, choose Position.
Only then can you select a Task No. - In the Task No. field, choose the task from the checklist task catalog.
maintool transfers the Text as well as the data type, range of values code and monitoring template code of the task. - Adjust the Text if required (maximum 80 characters).
- Turn on Mandatory if the result is to be required for finishing the work order.
Set Mandatory as the last step: if you change or remove the Task No. of a line, maintool resets Mandatory. If you change the Instruction Type, maintool also clears the Task No.
The Data Type, Range of Values Code and Monitoring Template Code columns are hidden on the Lines FastTab by default because maintool transfers the values from the catalog. Show them via personalization if required.
Text lines without a checklist task
For headings, notes or work steps, leave the Instruction Type blank and only enter a Text. If you turn on Mandatory for such a line, a result must also be entered in the work order; the result is then free text. If you want to reuse such a line, transfer it to the checklist task catalog with the Transfer to Task action, see Create a checklist task in the catalog.
Assign an instruction to a technical component
Optionally, assign an instruction to the technical components it applies to:
- Open the card of the technical component.
- Choose the Instructions action.
The Instruction References page opens. - In a new line, choose the instruction in the Instruction Code field.
If a technical component is entered as Detail No. in a line of the Work Order Texts, maintool then only offers the instructions assigned to this technical component when you select the instruction.
Result
The instruction is created and can be included in time schedules, work plans and work orders. If you add it there in the texts with the type Instruction, maintool puts the first line of the instruction in the line with the code and appends the other lines below it. See Add a checklist to a time schedule or work order.
maintool copies the lines of the instruction when you add it to a time schedule, work plan or work order. Later changes to the instruction only take effect where you add it afterwards. If you delete an instruction, maintool also deletes its lines and its assignments to technical components.
Related articles
- Checklists – overview
- Create a checklist task in the catalog
- Add a checklist to a time schedule or work order
- Answer a checklist in the work order
Related to