With checklists, you define which feedback must be given for a work order – for example an inspection finding, a rating or a meter reading. A work order with a checklist can only be finished once all mandatory tasks have been answered. This article explains the terms, the kinds of checklist tasks and the process from setup to finishing the work order.
Terms
- Checklist: maintool has no separate "Checklists" page. A checklist is an instruction whose lines are marked as Mandatory. For each of these lines, a Result must be entered in the work order.
- Checklist task catalog: On the Checklist Tasks page, you create reusable tasks, for example inspection points or questions. Each task has a Text and a Data Type, and optionally a Range of Values Code or a Monitoring Template Code.
- Instruction: On the Instructions page, you combine text lines into an instruction. Lines can refer to tasks from the checklist task catalog. An instruction without mandatory lines is a plain instruction that does not require any feedback.
- Work notice: On the Work Notices page, you enter plain information texts. Work notices contain no checklist tasks and do not expect a result.
Kinds of checklist tasks
You define which answer is expected in the work order on the task in the checklist task catalog.
| Kind | Setting in the catalog | Result in the work order | Example |
| Simple task | Data Type, for example Text | Free entry that matches the data type | "Rate the service provider's work in three words." with data type Text |
| Task with range of values | Data Type and Range of Values Code | Selection from the values of the range of values | Rating on a school grade scale: range of values with data type Integer and the values 1 to 6 |
| Task with object monitoring | Data Type Decimal and Monitoring Template Code | Measured value or meter reading; maintool posts it as performance data for the technical object when the work order is finished | Read the operating hours counter |
Process
- Create tasks in the checklist task catalog. See Create a checklist task in the catalog.
- Create ranges of values or object monitoring templates if required. Checklists use the same ranges of values as technical specifications, see Creating ranges of values. For tasks with object monitoring, see Object Monitoring Template Setup.
- Create an instruction. You add the catalog tasks and mark the required tasks as Mandatory. See Create an instruction with checklist tasks.
- Include the instruction. You add the instruction to the texts of a time schedule, a work plan or a work order. See Add a checklist to a time schedule or work order.
- Answer the checklist. In the work order, you enter the Result of each task in the Work Order Texts. See Answer a checklist in the work order.
- Finish the work order. maintool checks whether all mandatory tasks have a result and posts the results of tasks with object monitoring as performance data. See Finish and close a work order and Record performance characteristics with a checklist.
Setup
In the Work Order Management Setup, on the Checklist FastTab, you define:
- Checklist Task Nos.: number series for the tasks in the checklist task catalog. Without it, you cannot create a task.
- Checklist Perf. Jnl. Templ. and Checklist Perf. Jnl. Batch: journal that maintool uses to post the results of tasks with object monitoring. maintool checks these two fields every time a work order is finished, even if the work order contains no checklist.
For details, see Set up work order management.
Related articles
- Work order management overview
- Create a checklist task in the catalog
- Create an instruction with checklist tasks
- Add a checklist to a time schedule or work order
- Answer a checklist in the work order
Related to