Set up work order statuses

  • Updated

On the Work Order Status Setup page, you specify for each work order status whether it may be skipped, whether it can be downgraded from and who receives an email when a work order changes to this status. You also add your own statuses here and maintain the status names in several languages. What the individual statuses mean and how status changes work is described in Work order status.

Prerequisites

  • You have write permissions for the work order statuses. Without write permissions, the page opens read-only.

Open the Work Order Status Setup

Search for Work Order Status Setup using the search (Alt+Q) and open the page. Alternatively, choose the Functions > Change Work Order Status action in the Work Order Management Setup.

Fields of the Work Order Status Setup

Field Description
Value Internal value of the status between 100 and 599. The value determines the order of the statuses.
Status Name of the status in your language. It comes from the translations and cannot be changed here (see below).
Mandatory A mandatory status must not be skipped when the status is changed.
Downgrade possible From a status with this setting, you can go back to a lower status.
Description Free description of the status.
Send E-Mail to Person in Charge When the status changes to this status, the person in charge entered in the work order receives an email.
Send E-Mail to Resp. for Department When the status changes to this status, the person responsible for the responsible department of the work order receives an email.
Send E-Mail to Registered from When the status changes to this status, the people who registered the underlying work order requests receive an email.

maintool only sends emails for work orders whose work order category has Send E-Mail enabled. Which other information is required for this is described in Automatic email notifications.

Default statuses

maintool creates the following default statuses. You cannot delete default statuses or change their value.

Value Status Mandatory Downgrade possible
100 Planning yes no
200 Execution yes no
250 In Progress no no
270 Reported finished in mobile no yes
300 Finished no no
400 Closed yes no
500 Canceled yes no

You can change the following for the default statuses:

  • Description and the three email switches: freely.
  • Mandatory: switching on is always possible. Switching off is only possible for In Progress and Finished.
  • Downgrade possible: Turn on the setting for the status from which a work order may be set back – for example for Execution, so that work orders can be set back to Planning.
  • The name, using the translations (see below).

If a change is not allowed, the message You can not change Work Order Status … (Field …), because the status is very important for our system! appears.

Changes to Mandatory and Downgrade possible apply immediately to all work orders and require good knowledge of the processes in maintool. Only make them in consultation with collana apps.

Create your own status

  1. Open the Work Order Status Setup and create a new line.
  2. In Value, enter an unused value between 100 and 599. Choose it so that the status is in the right place in the order, for example 220 for a status between Execution and Finished.
  3. Enter a Description and specify Mandatory, Downgrade possible and the email switches.
  4. Create the names for the new status as described in the next section.

The new status is then available for selection when you change the status. If it is mandatory, it must not be skipped when changing across it.

maintool only runs the checks during a status change, for example before Execution or Finished, when changing to the default statuses Execution, Finished, Closed and Canceled. When changing to your own status, maintool records the change in the Work Order Status History and sends the emails that are set up. What can still be changed in the work order depends on the value: for a status with a value between 200 and 299, the lines can only be changed with Extended Work Order Planning, as with Execution.

Translate status names

The name that users see in the Work Order Status field comes from the translations of the status. If there is no translation in a user's language, the name remains empty for that user. A new status therefore needs at least one translation for each language your users work in.

  1. In the Work Order Status Setup, select the status.
  2. Choose the Related > Work Order Status Setup > Translations action.
  3. On the Work Order Status Translations page, enter one line per language: in Language ID the Windows language ID, for example 1031 for German (Germany) or 1033 for English (United States), and in Status the name. maintool fills in Language Name itself.

In the same way, you change the name of a default status or add further languages.

Status color

You do not set the color in which work orders of a status appear in the schedule board here, but in the legend of the schedule board. See Use the schedule board.

Delete a status

You can delete your own statuses as long as no work order has this status. Otherwise, the message You can not delete Work Order Status …, because the status is used in at least one Work Order Header! appears. Default statuses cannot be deleted.

Related articles

Related to

Was this article helpful?

0 out of 0 found this helpful

Have more questions? Submit a request