With types of damage, figures of damage and causes of damage, you describe damage to technical objects in a uniform way. You enter the codes in work order requests, work orders and work order feedback and analyze them later with the Damage Identifications report, for example for weak point analyses. This article describes how to create the codes and where maintool uses them.
Create damage codes
- Search for Types of Damage, Figures of Damage or Causes of Damage and open the list. In the Maintenance Role Center, you find the three lists under Setup › Technical Facility Management.
- Choose New.
- Enter a Code (up to 20 characters) and a Description (up to 50 characters).
| List | Describes | Examples |
| Types of Damage | What kind of damage it is | SA001 Electrical, SA002 Mechanical, SA003 Not determinable |
| Figures of Damage | What can be seen on the object | SB001 Fracture/crack, SB002 Deformation, SB003 Not determinable |
| Causes of Damage | What caused the damage | SU001 Wear, SU002 Overload, SU003 Not determinable |
Where maintool uses the damage codes
In the work order request, the work order and the work order feedback, the Activity FastTab contains the fields Type of Damage, Figure of Damage and Cause of Damage. The same fields exist per technical object in the details of the document.
- In the document header: When you change a field on the Activity FastTab, maintool transfers the value to all details of the document. You then enter different values for individual objects in the details.
- Per object: With the Details action, you open the Work Order Request Details, Work Order Details or Work Order Feedback Details page.
- Transfer to the follow-up document: When you create a work order from a work order request, maintool takes over the damage information from the header and the details. Likewise, a work order feedback takes over the damage information of the work order. If you post a work order feedback without a work order, the work order created in the process receives the damage information of the feedback.
- In the work order from execution: From the Execution status, the three fields on the Activity FastTab of the work order can no longer be changed.
- Posted documents: Posted work order requests and work order feedback as well as closed and canceled work orders still show the damage information.
Analyze damage information
The Damage Identifications report counts how often types, figures and causes of damage occur in work orders and shows the costs per object. It analyzes the information in the work order: first the values in the details, otherwise the values in the header. See Analyzing damage and types of activity.
Notes and limitations
- Damage information that you only enter or change in the work order feedback is not transferred to the work order when posting. The Damage Identifications report therefore does not take it into account.
- The lists have no further fields. You decide yourself how finely you differentiate; a code such as "Not determinable" helps when the cause remains open.
Related articles
- Set up work order management
- Fields of the work order card
- Analyzing damage and types of activity
- Set up master data for technical facility management
Related to