Before you build the equipment structure, create the master data you use to organize and classify technical objects: component address groups and the catalogs for technical components and vehicles. This article describes what maintool uses the individual lists for and how to create a component address group.
Prerequisites
- The Technical Facility Management Setup is filled in, see Set up technical facility management.
Where to find the lists
You open all lists using the search (Alt+Q) with their name or in the Maintenance Role Center under Setup › Technical Facility Management. Each list consists of the columns Code (up to 20 characters) and Description (up to 50 characters); the component address groups have additional columns (see below).
Component address groups
A component address group defines the view from which you map your facilities, for example by location or by process. With several groups, you map parallel structures that access the same technical components via the mounting positions. A mounting position can be assigned to only one component address per component address group.
- You assign the top-level component addresses to a group in the Component Address Group field; all lower levels inherit the group.
- The Equipment Information Center always shows the structure of one group. Without a group on the component address, the Equipment Structure action is not available.
- Only one group may be Cost Relevant. If a mounting position has no default dimensions of its own, maintool uses in the work order the dimensions of the component address to which the mounting position is assigned in the cost-relevant group (or of a higher-level component address).
- A group cannot be deleted as long as component addresses with this group exist.
Examples of groups:
| Code | Description |
| LOC | By location |
| KKS | Power plant classification system |
| PROC | By process |
Create a component address group
- Search for Component Address Groups and open the list.
- Choose New.
- In the Code field, enter an abbreviation, and in the Description field, enter the view of the facility.
- Enable Cost Relevant if the dimensions for work orders are to come from this structure. If another group is already cost relevant, maintool rejects the entry with an error message.
Structure cache of the Equipment Information Center
maintool caches the structure of each group so that the Equipment Information Center opens quickly. If you change component addresses, mounting positions, technical components, vehicles or assignments, maintool updates the cache in the background. In addition, a daily job queue entry (at 02:00) marks all groups for a rebuild.
- Rebuild Pending: A rebuild for the group is queued and has not completed yet.
- Last Rebuild Result: Whether the last rebuild succeeded. You can show the columns Last Rebuilt At and Last Rebuild Error Message if required.
- Rebuild EIC Cache action: rebuilds the cache of the selected group immediately. maintool confirms this with the message The Equipment Information Center structure cache for Component Address Group … has been rebuilt.
- Show Equipment-Informationcenter action: opens the Equipment Information Center for the selected group. If the cache is not usable, maintool rebuilds it first.
Available from version 20260800.0: structure cache with the columns Rebuild Pending and Last Rebuild Result and the Rebuild EIC Cache action. Rebuilding an unusable cache before opening the Equipment Information Center applies from version 20261000.0.
Catalogs for technical components
You use these catalogs to classify technical components. You enter the values on the technical component card. You can also enter component group, classification, type and construction type in data sheet templates and object monitoring templates. When you select a data sheet template on the technical component or a template code on the card of an object monitoring line, maintool only offers templates whose value matches the component or is empty.
| Page | Field on the technical component | Examples |
| Component Groups | Component Group | MOT Motor, PUMP Pump, GEN Generator |
| Classes | Classification | EL Electrical, HYD Hydraulic, PNEU Pneumatic |
| Types | Type | ASM Asynchronous machine (for example from the type plate) |
| Construction Types | Construction Type | SOL Solid construction, TIM Timber frame construction |
| Technical Manufacturers | Manufacturer Code (also on the vehicle card) | Abbreviation of the manufacturer |
You can also enter classification, type, construction type and manufacturer on the item (item card, collana maintool FastTab, fields Technical Classification Code, Technical Type Code, Technical Construction Type Code, Technical Manufacturer Code). With the Take over Item Datas action, the technical component takes over these values from the assigned item. See Bill of materials and spare parts of a technical component.
Catalogs for vehicles
You classify vehicles in three levels. You enter the values on the vehicle card.
| Page | Field on the vehicle card | Examples |
| Types of Vehicle | Type Of Vehicle | CAR Passenger car, TRUCK Truck |
| Vehicle Types | Vehicle Type | SED Sedan, EST Estate |
| Vehicle Models | Vehicle Model | STD Standard, PREM Premium |
Types of damage, figures of damage and causes of damage
You also find the lists Types of Damage, Figures of Damage and Causes of Damage under Setup › Technical Facility Management. They are used in work order requests, work orders and work order feedback, see Set up damage codes.
Further master data
- Technical specifications, ranges of values and data sheet templates: Technical specifications and data sheets – basics
- Locations of technical objects: Locations of technical objects
- Templates for the journals: Set up journal templates
- Object monitoring templates: Set up object monitoring templates
Related articles
- Set up technical facility management
- Plan the equipment structure
- Create a component address
- Use the Equipment Information Center
Related to