Locations of technical objects

  • Updated

A location describes where a technical object is situated: address, contact person and coordinates. This is particularly useful when equipment is located outside your own premises. You create locations once and assign them to component addresses, mounting positions and technical components. Subordinate objects can take over the location automatically.

Create a location

  1. Search for Technical Object Locations and choose New.
    The Technical Object Location card opens.
  2. On the General FastTab, enter a Code.
  3. If required, select a contact of type company in the Company No. field and a person of this company in the Contact No. field.
    Each time, maintool asks Do you want to transfer the contact informations?. With Yes, maintool transfers the address, phone and cell phone number, fax number, e-mail, home page and salesperson code from the contact. With No, maintool only fills in Company Name or Contact Name.
  4. Complete or change the address (Name, Address, Post Code, City, Country/Region Code) and, if required, further information such as Salesperson Code, Shipment Method Code, Shipping Agent Code or Service Zone Code.
  5. On the Communication FastTab, enter phone no., cell phone no., fax no., e-mail and home page if required.
  6. On the Coordinates FastTab, enter Latitude and Longitude if required.

Show the location on a map

  1. On the location card, choose the Online Map action.
  2. Under Show map with:, choose This address or This coordinates.
    The map service opens in the browser. For This coordinates, latitude and longitude must be entered.

Note for partners:
The online map uses the Business Central Online Map Setup. maintool adds the fields MT Map Parameter Setup for Address and MT Map Parameter Setup for Coordinates there, which define which map service is called for addresses and coordinates. If the online map is not set up, the action does not work. The Bing Key of the Work Order Management Setup is not used here.

Assign a location to an object

  1. Open the card of the component address, mounting position or technical component.
  2. On the General FastTab, select the location in the Locality Code field.
  3. Use the switches to define how the location is passed on in the structure:
    • Passon Location: The object passes its location on to subordinate objects.
    • Inherit Location: The object takes over the location of its parent object.
    Both switches are turned on for new objects.

The Location action on the object card shows the details of the assigned location.

How maintool passes on the location

  • When an object is placed in the structure (field Component Address from, Mounting Position No. or Component from), it takes over the Locality Code of the parent object if Passon Location is turned on there and Inherit Location is turned on for the object itself. The Inherit from Location field then shows the location taken over.
  • If you later change the location of an object with Passon Location, maintool passes the new location on to all directly subordinate objects with Inherit Location – and further down from there, as long as the next level also has Passon Location turned on.
  • The location is passed on from the component address to sub-component addresses and assigned mounting positions, from the mounting position to the technical components installed there, and from a technical component to its subcomponents.
  • If you assign a mounting position to a component address, the mounting position takes over the Locality Code of the component address.

Example: The component address Plant North has the location NORTH. A mounting position is assigned to the component address and receives NORTH. A pump that is installed in this mounting position and has Inherit Location turned on also receives NORTH.

What the location is used for

If you assign an object with a Locality Code to a work order, maintool automatically creates a location of work in the order from the location. How this works in detail is described in Enter the location of work.

Notes and limitations

  • Vehicles do not have a location in the sense of this article. The Actual Location field on the vehicle card is the mounting position where the vehicle is located.
  • Technical components on a vehicle do not take over a location.

Related articles

Related to

Was this article helpful?

0 out of 0 found this helpful

Have more questions? Submit a request