Create a vehicle

  • Updated

Your equipment can also include vehicles, for example forklifts, vans or buses. You integrate a vehicle into the equipment structure by assigning a mounting position to it as its Actual Location. If required, you break down its technical setup with technical components that you install in the vehicle.

Prerequisites

Create a vehicle

  1. Search for Vehicles and open the list.
  2. Choose New. The Vehicle Card opens.
  3. Leave the No. field blank and move to the Description field. maintool assigns the number from the number series. (If the number series allows Manual Nos., you can also enter your own number with a maximum of 20 characters.)
  4. In the Description field, enter the name (maximum 100 characters). maintool copies it to the Search Description.
  5. In the Actual Location field, select the mounting position where the vehicle is located or to which it belongs.
  6. If required, fill in further fields on the General and Administration FastTabs (see below).

What the assignment to the mounting position does

  • The vehicle appears in the equipment structure below the mounting position. On the Mounting Position Card, the Vehicles action shows all vehicles of this mounting position.
  • The vehicle takes over the Operating Status of the mounting position if Pass on Operating Status is enabled there and Inherit from Operating Status on the vehicle.
  • If the vehicle has no default dimensions, maintool takes the dimensions of the mounting position into work orders.
  • Vehicles have no locality code of their own and take over neither a location address nor a customer from the mounting position. If required, maintain the Customer No. yourself on the Administration FastTab.
  • You change the Actual Location directly on the card; no ledger entries are created.

Install technical components in the vehicle

On the technical component card, enter the vehicle in the Component from Vehicle No. field (see Create a technical component). The Technical Components action on the Vehicle Card shows all components installed in the vehicle.

Further fields

Field Meaning
Actual Value, Value Line No. (Object Monitoring Line) Select an object monitoring line of the vehicle, for example the odometer. Actual Value then shows its current performance characteristic value. See Link a technical object to an object monitoring template.
Type Of Vehicle, Vehicle Type, Vehicle Model, Manufacturer Code Classification of the vehicle from the setup lists of the same name or from the Technical Manufacturers.
Emission Class Code (14.1), Manufacturer Code (2.1), Model Code (2.2), Fuel Type Code (10) Information from the registration certificate; the number in brackets is the respective field of the document.
Data Sheet Template Copies the lines of the template to the data sheet of the vehicle, see Create and assign data sheet templates.
Operating Status, Inherit from Operating Status, Pass on Operating Status Operating condition of the vehicle and how it is passed on to the installed technical components (available from version 20261000.0), see Operating status for technical objects.
Barcode / QR Code Code on the label. In the work order request for phone and tablet, users can find the vehicle by this code.
Administration FastTab: global dimensions (captioned with the name of the dimension) and Dimensions action Default dimensions of the vehicle for work orders.
Administration FastTab: Customer No., Vendor No., Fixed Asset No. Customer for whom the vehicle is maintained, vendor who manages the vehicle, and fixed asset.
Administration FastTab: Blocked For blocked vehicles, you cannot post performance characteristics, among other things, and maintool does not create work orders from time schedules for them.

The other fields are for information only, for example Description 2, Vehicle Identification No., Licence No., Initial Registration Date, Warranty Expiring Date, Number 2, Refueling System ID and, on the Administration FastTab, Registration Date, Acquisition Date and Insurance No.

Result

The vehicle appears below its mounting position in the equipment structure. With the Equipment Structure action, you open the Equipment Information Center at the position of the vehicle. The action is available if the mounting position is assigned to a component address with a component address group.

Notes and limitations

Related articles

Related to

Was this article helpful?

0 out of 0 found this helpful

Have more questions? Submit a request