A mounting position is the place where technical components are installed or vehicles are parked. It connects the component addresses with the technical components. For the mounting position to appear in the equipment structure, you assign it to a component address – with parallel structures, to one component address per component address group.
Prerequisites
- In the Technical Facility Management Setup (Numbering FastTab), a number series is specified in the Mounting Position Nos. field. For a number according to your own coding, the number series must allow Manual Nos.
- The component address to which you assign the mounting position exists and belongs to a component address group (see Create a component address).
Create a mounting position
- Search for Mounting Positions and open the list.
- Choose New. The Mounting Position Card opens.
- In the No. field, enter the code of the mounting position (maximum 20 characters), or leave the field blank so that maintool assigns the number from the number series.
- In the Description field, enter the name (maximum 100 characters). maintool copies it to the Search Description.
- If required, fill in further fields (see below).
Assign the mounting position to a component address
- On the Mounting Position Card, choose the Component Adresses action. The Component Address References page shows the existing assignments.
- Create a new line and select the component address in the Component Address No. field.
- For a parallel structure: create another line with the component address of the other component address group.
You can also assign from the component address: choose the Mounting Positions action on the Component Address Card, then create a line with the Mounting Position No. on the Mounting Position References page.
To move a mounting position, enter a different component address in the assignment line.
Further fields
| Field | Meaning |
| Global dimensions (captioned with the name of the dimension) and Dimensions action | Default dimensions of the mounting position for work orders. If the mounting position has none, maintool takes the dimensions of the component address to which it is assigned in the component address group marked as Cost Relevant. |
| Data Sheet Template | Copies the lines of the template to the data sheet of the mounting position, see Create and assign data sheet templates. |
| Customer No., Locality Code, Inherit Location, Passon Location | Customer and location address of the mounting position and how they are passed on to the installed technical components, see Locations of technical objects. |
| Operating Status, Inherit from Operating Status, Pass on Operating Status | Operating condition of the mounting position and how it is passed on to technical components and vehicles at the mounting position (available from version 20261000.0), see Operating status for technical objects. |
| Blocked | For blocked objects, maintool does not create work orders from time schedules. |
| Barcode / QR Code | Code on the label. In the work order request for phone and tablet, users can find the mounting position by this code. |
Result
The mounting position appears below the component address in the structure of each assigned component address group. Check this with the Equipment Structure action. Next, install technical components in the mounting position or assign vehicles to it. The Technical Components and Vehicles actions on the card show what is located at the mounting position.
Notes and limitations
- Per component address group, a mounting position can only be assigned to one component address. maintool rejects a second assignment in the same group with the message The Mounting Position No. … is already used in the Component Address Group ….
- The Equipment Structure action is available if the mounting position is assigned to exactly one component address with a group. If it is assigned to several component addresses, maintool opens the structure of the group that is specified for you in the Component Address Group field of the User Setup. If this entry is missing, the action is not available and maintool shows a notification.
- You do not record performance characteristics for mounting positions. Object monitoring on a mounting position is only possible with fixed time intervals (see Performance characteristics – overview).
- Mounting positions cannot be duplicated.
Related articles
- Plan the equipment structure
- Create a technical component
- Create a vehicle
- Equipment structure: errors when assigning mounting positions and levels
Related to