Performance characteristics – overview

  • Updated

Performance characteristics are counter readings, measured values and condition values that you post for a technical object – for example the operating hours of a pump, the mileage of a vehicle or the fill level of an oil tank. maintool stores them as performance characteristic ledger entries. With a time schedule on the object monitoring line, maintool suggests activities based on them, for example maintenance after 3,000 operating hours.

Where you can record performance characteristics

  • You post performance characteristics for Component Addresses, Technical Components and Vehicles.
  • You cannot record performance characteristics for Mounting Positions. On the card of an object monitoring line of a mounting position, the Template Code is disabled; object monitoring lines of mounting positions are only used for the type of monitoring Date (activities based on a time interval, see Appointment management overview).
  • maintool only records numbers (up to five decimal places). Map conditions such as "OK" / "not OK" to numbers, for example 1 and 0.

Types of monitoring

The Type of Monitoring of the object monitoring template defines which kind of performance characteristics an object provides:

Type of monitoring What you post Examples
Counter the counter reading; maintool adds up the increase in the Total Value operating hours counter, odometer, switching cycle counter
Threshold / Range a measured value that should lie within a range temperature, humidity, oil pressure, condition 0 / 1
Attrition / Consumption the current remaining value as a positive number; maintool adds up the consumption in the Total Value fill level of an oil tank, fuel tank, remaining thickness of a brake pad

The fourth type of monitoring, Date, works without performance characteristics, using a fixed time interval. It belongs to appointment management.

How to proceed

  1. Set up object monitoring templates – one template per kind of performance characteristic.
  2. Link a technical object to an object monitoring template – create an object monitoring line with the template on the object.
  3. Record performance characteristics in one of these ways:
  4. If necessary: Correct posted performance characteristics.

Where you see posted performance characteristics

  • Performance Characteristic Ledger Entries – all posted values. You open them, for example, from the object monitoring line (Object Monitoring Line › Ledger Entries) or from the card of the object.
  • Performance Characteristic Registers – one entry per posting run with the posted entry numbers.
  • Actual Value on the card of the technical component or vehicle – shows the current value of the object monitoring line that you select in the Value Line No. (Object Monitoring Line) field. The caption of the field comes from the template (Actual Value Caption).

Performance characteristics are not connected to inventory: posting a fill level does not change any item inventory, and item postings do not change performance characteristics.

Activities based on performance characteristics

How counter readings, consumption and thresholds trigger dates and work orders is described in appointment management:

Related articles

Related to

Was this article helpful?

0 out of 0 found this helpful

Have more questions? Submit a request