Create a technical component

  • Updated

Technical components are the parts you maintain – for example a motor, a pump or a drive. You install a technical component in a mounting position, below another technical component or in a vehicle. This guide shows how to create a technical component and install it in the equipment structure.

Prerequisites

  • In the Technical Facility Management Setup (Numbering FastTab), a number series is specified in the Technical Component Nos. field.
  • The mounting position, the parent technical component or the vehicle exists.

Create a technical component

  1. Search for Technical Components and open the list.
  2. Choose New. The Technical Component Card opens.
  3. Leave the No. field blank and move to the Description field. maintool assigns the number from the number series. (If the number series allows Manual Nos., you can also enter your own number with a maximum of 20 characters.)
  4. In the Description field, enter the name (maximum 100 characters). maintool copies it to the Search Description.
  5. Install the component by filling in exactly one of these fields:
    • Mounting Position No. – the component sits in a mounting position. If required, use the Position field (0 to 999) to define the order of the components within the mounting position.
    • Component from – the component is part of another technical component. If the parent component has component places, select the place in the Component Place field.
    • Component from Vehicle No. – the component is installed in a vehicle.
  6. If required, fill in further fields (see below).

What happens when you install the component

  • As soon as one of the three fields is filled in, the card locks the other two. To change the installation location, first clear the filled-in field.
  • maintool fills in Main Component and Mounting Position from Main Component – that is, the top component of the chain and its mounting position.
  • Components below components form a tree with a maximum of 8 levels.
  • From the mounting position or the parent component, the component takes over the Customer No. and – if Passon Location is enabled there and Inherit Location here – the Locality Code. It takes over neither customer nor location from a vehicle.
  • The component takes over the Operating Status from the mounting position, parent component or vehicle if Pass on Operating Status is enabled there and Inherit from Operating Status here.

Assignment and history

The Assignment field shows whether the component already has an installation and removal history:

  • Installation – no history yet. Only in this state can you change the installation location and the fields on the Spare Part FastTab directly on the card.
  • Bound – the component is installed, the history is running.
  • Unbound – the history is running, the component is not installed (for example removed).

When the structure is complete, start the history with the Start History action, see Start the history of technical components. After that, you change the installation location only with the component journal, see Install, remove and relocate a technical component. If you try it on the card anyway, the message Assignment has to be Installation for Tech. Component … appears.

Further fields

Field Meaning
Component Group, Classification, Type, Construction Type Classification of the component. The selection in the Data Sheet Template field only shows templates that match these values or are blank for the respective characteristic.
Data Sheet Template Copies the lines of the template to the data sheet of the component, see Create and assign data sheet templates.
Manufacturer Code Manufacturer from the Technical Manufacturers list; the Manufacturer Name is displayed.
Resource No., Fixed Asset No. Link to a resource (for example if the component is a tool) or to a fixed asset.
Actual Value, Value Line No. (Object Monitoring Line) Shows the current performance characteristic value of the selected object monitoring line, see Link a technical object to an object monitoring template.
Global dimensions (captioned with the name of the dimension) and Dimensions action Default dimensions for work orders. If the component has none, those of the parent component or of the mounting position apply.
Locality Code, Inherit Location, Passon Location Location address and how it is passed on, see Locations of technical objects.
Operating Status, Inherit from Operating Status, Pass on Operating Status Operating condition and how it is passed on to subcomponents (available from version 20261000.0), see Operating status for technical objects.
Blocked For blocked components, you cannot post performance characteristics or installations and removals, among other things.
Barcode / QR Code Code on the label. In the work order request for phone and tablet, users can find the component by this code.

The Spare Part FastTab (item, serial number, location) and the Bill of Materials are described in Bill of materials and spare parts of a technical component. You create places on the component where subcomponents sit with the Component Places action, see Technical component place.

Result

The technical component appears at its installation location in the equipment structure. Check this with the Equipment Structure action.

Notes and limitations

  • If an object monitoring line inherits its counter reading from another object, you cannot change Component from and Component from Vehicle No.
  • You create similar components faster by copying, see Duplicate technical objects.

Related articles

Related to

Was this article helpful?

0 out of 0 found this helpful

Have more questions? Submit a request