You create a work order manually when it does not result from a work order request, a date proposal or another work order. The quickest way is to create it directly on the affected technical object using a wizard. If the object is not yet known, create the work order in the Work Orders list and assign the object later.
Prerequisites
- A number series is specified in the Work Order Nos. field in the Work Order Management Setup (Numbering FastTab).
Create a work order
From a technical object (with wizard)
- Open the list or card of the affected object, for example Component Addresses, Mounting Positions, Technical Components or Vehicles.
- Choose the Create Work Order action.
The Create a Work Order for a Technical Object wizard opens. The reference object and the object number are already filled in. - Specify the number series and describe the work order. Both are mandatory. Choose Next >.
- If required, fill in further information: person in charge, responsible department, shift, type of activity, priority, malfunction code and work order category. Choose Next >.
- If required, enter the dates: Execution Date-Time, Work Order Duration, Planed Completion Date-Time and, if the equipment is down, the standstill with its duration.
- Select Open work order card? if you want to continue working on the work order right away.
- Choose Finish.
The steps after the description are optional. From there, you can complete the wizard with Finish at any time.
You can also open the wizard using the search (Create a Work Order for a Technical Object). In this case, you select the reference object and the object number yourself in the first step.
If you prefer to fill in the work order card directly, you can turn off the wizard: in the last step of the wizard using Deactivate 'Create Work Order Wizard', or in the User Setup using the Deactivate 'Create Work Order' Wizard field. The Create Work Order action then creates the work order immediately and opens the card. For this, your user must exist in the User Setup; otherwise, the message User … was not found. appears.
From the Equipment Information Center
In the Equipment Information Center, you can also create a work order directly on the selected object. This is described in Create a work order from the Equipment Information Center.
Without reference to a technical object
- Open the Work Orders list and choose New. In the work planning Role Center, you can also use the Work Order or New Work Order action.
A new work order card opens. - maintool assigns the number automatically from the number series that is set up. If you want to use a different number series, choose the … button in the No. field.
- Fill in the General FastTab (see below).
Fill in the General FastTab
Your company decides which fields to fill in. These fields form the core of the work order:
| Field | Content |
| Description, Description 2, Description 3 | What needs to be done? The first line appears in lists and overviews. |
| Person in Charge No. | Person responsible for the work order (resource of type Person). |
| Res. Department No. | Responsible department (resource group). |
| Work Order Category Code | Kind of work order, for example repair or maintenance. Can bring default values (see below). |
| Work Order Status | A new work order always has the status Planning. |
| Standing Order | Marks a collective work order, see Create a standing order. |
maintool fills in some values when the work order is created: Execution Date-Time with the work date (0:00), Document Date with the work date, and the Work Order Posting Group from the Work Order Management Setup (General FastTab).
Work order category with default values
A work order category can contain default values: type of activity code, malfunction code, work order posting group, further job costing, and global dimensions 1 and 2. When you select such a category, maintool asks: Do you want to transfer the default values for the "…" work order category code?
- Yes: The default values overwrite the existing information in the work order. The dimensions of the category are transferred.
- No: The work order keeps its existing information; only the category is entered.
If Send E-Mail is selected for the category, maintool automatically sends emails when the status changes, see Automatic email notifications. How to create categories is described in Set up work order categories.
Result
The work order is created and has the status Planning. As long as the work order is in planning, you can change all information. Next, plan the work order:
- Assign technical objects to a work order (if not done yet)
- Enter planning lines – material, personnel and external services
- If required, add activities and checklists, see Add a checklist to a time schedule or work order
- Schedule a work order and set it to execution
The fields on the Activity FastTab (for example type of activity code, malfunction code, type of damage) and the Accounting FastTab (for example work order posting group, cost center) are explained in Fields of the work order card. Fill in the activity fields as completely as possible so that you can analyze malfunctions later. From the status Execution onwards, these fields can no longer be changed.
Related articles
- Work orders – overview
- Create a work order from a work order request
- Create a work order from the Equipment Information Center
- Fields of the work order card
Related to