Fields of the work order card

  • Updated

This article describes all FastTabs and fields of the work order card. Which fields you fill in depends on your internal rules and the analyses you need. For step-by-step instructions on creating a work order, see Create a work order manually.

General information about the fields

  • If a work order is created from a work order request, a date proposal, a follow-up work order or a work order category with default values, many fields are already filled in.
  • From the Execution status onwards, many fields can no longer be changed. This is noted in the tables. Descriptions, appointments and some indicators remain editable.
  • Fields you do not see are either classified as additional fields (visible with Show more on the FastTab) or hidden. You can show hidden fields with Personalize.

General FastTab

Field Description
No. Number of the work order. Assigned automatically from the number series in the Work Order Nos. field on the Work Order Management Setup (Numbering FastTab) page. To choose a different number series, use the … button. Cannot be changed from Execution onwards.
Description, Description 2, Description 3 Short description of the work order, for example following the pattern "what – where – who". Use comments for longer texts.
Person in Charge No. Person responsible for the work order. Selected from the resources of type Person. Cannot be changed from Execution onwards.
Res. Department No. Department that carries out or supervises the work order. Selected from the resource groups. Cannot be changed from Execution onwards.
Work Order Status Current status of the work order. You change it with the Status Change action or by selecting a value in the field. See Work order status.
Work Order Category Code Category for analyses, for example repair, maintenance or inspection. If the category has default values, maintool asks whether to apply them. Cannot be changed from Execution onwards.
Type of Origin Shows where the work order came from, for example Work Order Request or Time Schedule. Blank for work orders created manually. The values are explained in Work orders – overview.
Origin No. Number of the origin document. If the work order has several origin lines, (Multiple) is shown. The Origin Lines action shows all origins.
Origin Contract No. Contract position the work order was created from (contract management). Additional field, visible with Show more.
Planned Costs % Bar showing the costs incurred in relation to the planned costs. If the planned costs are exceeded, the bar shows the excess as a percentage. Which amounts are compared is defined in the Exceeding Planned Cost Work Order field on the Work Order Management Setup (General FastTab) page.
Standing Order Marks a standing order. Standing orders appear in a separate tile in the Role Center and not among the current work orders.
Planned Marks planned activities. Set automatically when the work order is created from a time schedule, an object monitoring line or a contract. Used for analyses, for example planned versus unplanned work.
Blocked Puts the work order on hold: no postings and no status change to Execution or higher. See Work orders – overview.
Mobile in Process of Only with maintool mobile: user who has taken over the work order in the app. Set by the app and cannot be changed.

Technical Object FastTab

Here you assign the work order to one or more technical objects. The procedure is described in Assign technical objects to a work order.

Field Description
Reference Object Type of technical objects: Component Address, Mounting Position, Technical Component or Vehicle. A work order can only contain objects of the same type. Cannot be changed from Execution onwards.
Detail No. Number of the assigned technical object. If there are several objects, (Multiple) is shown. Use the … button to open the object card or the list of assigned objects.
Detail Description Description of the assigned object. Remains blank if there are several objects.

Lines FastTab

In the lines, you plan resources, resource groups, items and external services. Fill in a line from left to right so that maintool can determine prices, bin and availability. From Execution onwards, lines can only be changed with Extended Work Order Planning, and from Finished onwards not at all. Described in detail in Enter planning lines.

Columns visible by default:

Column Description
Type Type of line: blank (text line), Item, External Service, Resource, Resource Group or Sales Item, see Enter planning lines.
No., Description Number and description of the item, resource and so on.
Quantity, Unit of Measure Code Planned quantity and unit of measure.
Work Type Code Work type, for example for different hourly rates of resources.
Unit Cost, Line Amount Cost per unit and planned costs of the line.
Origin Contract No. Contract position the line originates from (contract management).
Conflicts Shows whether there is an availability conflict for the line. See Availability conflicts in the work order.

With Personalize you can show further columns, including Description 2, Item is Bill of Materials, Location Code, Bin Code, Variant Code, Buy-from Vendor No., Direct Unit Cost, Purchase Amount, Unit Price, Sales Amount, Profit %, Overhead Rate % (Cap.), Reserve, Reserved Qty. (Base), Execution Date-Time, Quantity (Base), Reported Quantity and the dimensions.

Activity FastTab

Information about the activity, mainly for analyses and weak point analysis. From Execution onwards, the fields can no longer be changed (exceptions in the table).

Field Description
Work Plan No. Work plan whose data is to be transferred to the work order. After you select it, maintool opens the Transfer Work Plan Data report. With Extended Work Order Planning, it can be changed until the Finished status.
Type of Activity Code Type of activity, for example maintenance, inspection or repair.
Shift Code Shift in which the work order is carried out.
Work Order Priority Code Urgency of the work order.
Malfunction Code Type of malfunction, for analyses and filters.
Damage Case No. Damage case the work order refers to. Only visible with permission for warranty management (public transport module). Remains editable.
Type of Damage Type of damage.
Figure of Damage Appearance of the damage, for weak point analysis.
Cause of Damage Cause of the damage, for weak point analysis.

Accounting FastTab

Financial information for posting the work order. From Execution onwards, the fields can no longer be changed (exceptions in the table).

Field Description
Capitalization For investments: the expenses are posted to the account in the Account No. field. If the toggle is on, an account number must be specified when posting.
Account No. G/L account for capitalized expenses, for example assets under construction. Only posting accounts are allowed.
Work Order Posting Group Together with the posting setup, controls which accounts are posted to. Required for feedbacks and postings. Usually prefilled from the work order category or the Work Order Management Setup page.
Global dimensions 1 and 2 (for example Department Code, Project Code) Dimension values of the work order. The field names depend on the global dimensions in your general ledger. Usually taken from the technical object.
Fixed Asset No. Links the work order to a fixed asset in fixed asset management. For information only.
Budget Name Budget the work order is assigned to. See Assign a work order to a budget and calculate costs.
Budget Position No. Position in the budget. Can only be selected if a Budget Name is specified.
Further Job Costing Indicates that the services are invoiced to a customer. Remains editable.
Sales to Customer No. Customer for the invoicing. Can only be changed if Further Job Costing is on. Takes over the customer's currency and price group and recalculates the lines.
Currency Code Currency for invoicing if it differs from the local currency. Taken from the customer.

Appointments FastTab

The scheduling of the work order. How the fields work together is described in Schedule a work order and set it to execution.

Field Description
Execution Date-Time Planned start of execution.
Work Order Duration Planned duration, for example 2 hours or 3 days. maintool calculates the completion date from the start and the duration.
Planed Completion Date-Time Planned end. Calculated, but can be overwritten.
Standstill Indicates that the object is at a standstill during the work. Only then can the following three fields be changed.
Standstill from Date-Time Start of the standstill.
Standstill Duration Duration of the standstill.
Standstill until Date-Time End of the standstill.
Document Date Date of the work order document. Prefilled with the work date when the work order is created.
Opening Date-Time Time at which the work order was set to Execution. Set automatically. Use the … button to open the Work Order Status History.
Reported finish at Date-Time Time the work order was reported finished (Finished status). Set automatically.
Reported complete at Date-Time Time the work order was closed (Closed status). Set automatically.

The FactBoxes on the right-hand side of the card are described in FactBoxes of the work order card.

Related articles

Related to

Was this article helpful?

0 out of 0 found this helpful

Have more questions? Submit a request