Technical facility management overview

  • Updated

With technical facility management, you map your plants, buildings, machines and vehicles as a structure of technical objects. These objects are the basis for maintenance: you assign work order requests, work orders, time schedules and performance characteristics to them. This article explains the terms and leads to all articles in this area.

Technical objects

Object Meaning
Component Address Group Defines the view of your facilities, for example by location or by process. With several groups, you map parallel structures.
Component Address Builds the structure, for example plant, machine, machine part. Up to eight levels below each other and any number of component addresses side by side. You assign the top level to a group in the Component Address Group field, and the following levels via the Component Address from field.
Mounting Position Place where technical components or vehicles are installed or located. A mounting position can be assigned to several component addresses, but only to one per component address group. In this way, it connects the parallel structures.
Technical Component The object that is actually installed, for example a pump or an electric motor. It is installed in a mounting position, in another technical component (up to eight levels) or in a vehicle. maintool documents installations and removals in the history of the component.
Vehicle Vehicles of all kinds. You assign a vehicle to a mounting position via the Actual Location field. Technical components can be installed in a vehicle.

You manage items such as spare parts, wear parts and operating supplies in Business Central. They are not technical objects and do not appear in the equipment structure. However, you can assign an item as a spare part and a bill of materials with items to a technical component.

Example: two parallel structures

A pump is recorded in a plant structure (component address group PLANT) and in a building structure (component address group BUILDING). Both structures lead via the same mounting position Pump to the same technical component Pump 4711.

  • Plant structure: Plant 1 › Machine 1 › Machine part 1 › Mounting position Pump › Pump 4711
  • Building structure: Building 1 › Hall 1 › Mounting position Pump › Pump 4711

What you maintain on technical objects

  • Data sheets: Technical specifications such as power, voltage or degree of protection that you can search for later.
  • Location and customer: Address of component addresses, mounting positions and technical components, which maintool takes over into the work order as the location of work. Higher-level objects can pass on location and customer to lower-level objects.
  • Operating status: whether an object is operating, on standby, shut down or decommissioned, with a history in the operating status entries.
  • History: installations, removals and relocations of technical components as entries.
  • Performance characteristics: counter readings and measured values from which maintool suggests maintenance.
  • Default dimensions: for example the cost center that maintool takes over into work orders for the object.

Available from version 20261000.0: operating status and operating status entries on all technical objects.

Equipment Information Center

The Equipment Information Center shows the structure of a component address group as a tree. From there, you open cards, entries and documents for each object and create work orders. See Use the Equipment Information Center.

Setup

Equipment structure

Technical specifications and data sheets

Performance characteristics

Troubleshooting

Related articles

Related to

Was this article helpful?

0 out of 0 found this helpful

Have more questions? Submit a request